100039 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
OBD1000-R100-2EP-IO-0,3M-V31 Diffuse Mode Sensor “P+F”

Miniature design with versatile mounting options
Extended temperature range
-40 °C … 60 °C
High degree of protection IP69K
IO-Link interface for service and process data
Detection range 2 … 1000 mm
Detection range min. 20 … 50 mm
Adjustment range 50 … 1000 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 65 mm at a distance of 1000 mm
Opening angle 3.7 °
Ambient light limit EN 60947-5-2
Functional safety related parameters
MTTFd 724 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on – power on
flashing (4Hz) – short circuit
flashing with short break (1 Hz) – IO-Link mode
Function indicator LED yellow:
constantly on – object detected
constantly off – object not detected
Control elements Light-on/dark-on changeover switch
Control elements Sensing range adjuster
Electrical specifications
Operating voltage 10 … 30 V DC
Ripple max. 10 %
No-load supply current < 25 mA at 24 V supply voltage Protection class III Interface Interface type IO-Link ( via C/Q = pin 4 ) IO-Link revision 1.1 Device ID 0x110101 (1114369) Transfer rate COM2 (38.4 kBaud) Min. cycle time 2.3 ms Process data width Process data input 1 Bit Process data output 2 Bit SIO mode support yes Compatible master port type A Output Switching type The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected Switching voltage max. 30 V DC Switching current max. 100 mA , resistive load Usage category DC-12 and DC-13 Voltage drop = 1.5 V DC Switching frequency 1000 Hz Response time 0.5 ms Conformity Communication interface IEC 61131-9 Product standard EN 60947-5-2 Approvals and certificates EAC conformity TR CU 020/2011 UL approval E87056 , cULus Listed , class 2 power supply , type rating 1 Ambient conditions Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains Storage temperature -40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Housing width 11 mm Housing height 37.1 mm Housing depth 21.5 mm Degree of protection IP67 / IP69 / IP69K Connection fixed cable 300 mm with M8 x 1 male connector; 4-pin Material Housing PC (Polycarbonate) Optical face PMMA Mass approx. 10 g Cable length 0.3 m Classifications System Classcode ECLASS 11.0 27270903 ECLASS 10.0.1 27270903 ECLASS 9.0 27270903 ECLASS 8.0 27270903 ECLASS 5.1 27270903 ETIM 8.0 EC001821 ETIM 7.0 EC001821 ETIM 6.0 EC001821 ETIM 5.0 EC001821 UNSPSC 12.1 39121528