101186156 – Schmersal

STOCK: 0.00 unidade(s)
BNS 260 STG-AS-L Interface AS Safety Sensor “Schmersal”

EAN: 4030661333663
2 m Pre-wired cable with connector M12, straight, 4-pole
Safety sensor
Thermoplastic enclosure
no mechanical wear
36 mm x 26 mm x 13 mm
Integrated AS-Interface
Concealed mounting possible
Long life
Insensitive to transverse misalignment
Insensitive to soiling
AS-Interface LED and status display
eCl@ss number, version 12.0
27-27-44-01
eCl@ss number, version 11.0
27-27-24-02
eCl@ss number, version 9.0
27-27-24-02
ETIM number, version 7.0
EC002544
ETIM number, version 6.0
EC002544
Approvals – Standards
Certificates
TÜV
cULus
ASi-SaW
General data
Standards
EN IEC 62026-2
EN ISO 13849-1
EN IEC 60947-5-3
EN IEC 61508
Working principle
Magnetic drive
Installation conditions (mechanical)
quasi-flush
Housing material
Glass-fibre, reinforced thermoplastic
Reaction time, maximum
100 ms
Gross weight
104 g
General data – Features
Coding
Yes
Integral system diagnostics, status
Yes
Safety classification
Standards
EN IEC 61508
Performance Level, up to
e
Category
4
PFH value
6.21 x 10?? /h
Note (PFH-value)
up to max. 500,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in
3
Mission time
20 Year(s)
Mechanical data
Actuating element
Magnet
Door hinge
Left
Direction of motion
Head-on to the active surface
Mechanical data – Switching distances according EN IEC 60947-5-3
Note (Switching distance Sn)
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance “ON” Sao
5 mm
Assured switching distance “OFF” Sar
15 mm
Note (Repeat accuracy R)
Wiederholgenauigkeit R = 0,1 x Sao
Mechanical data – Connection technique
Length of cable
2 m
Termination
Connecting cable with M12 connector, straight, 4-pole
Wire cross-section
0.23 mm2
Wire cross-section
23 AWG
Material of the Cable mantle
LSYY
Mechanical data – Dimensions
Length of sensor
13 mm
Height of sensor
26 mm
Amzient conditions
Degree of protection
IP67
Ambient temperature
-25 … +60 °C
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+70 °C
Resistance to vibrations
10 … 55 Hz, amplitude 1 mm
Restistance to shock
30 g / 11 ms
Protection class
II
Ambient conditions – Insulation values
Rated insulation voltage Ui
32 VDC
Rated impulse withstand voltage Uimp
0.8 kV
Overvoltage category
III
Degree of pollution
3
Electrical data – AS Interface
Rated operating voltage
18 … 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum
50 mA
Electrical data – AS-Interface specification
AS-i Specification
Safety-Slave
AS-i Version
V 2.1
AS-i Profile
S-0.B.F.E
AS-i, IO-Code
0x0
AS-i, ID-Code
0xB
AS-i, ID-Code1
0xF
AS-i, ID-Code2
0xE
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3
No Function
AS-i Parameter bits, P0 … P3
No function
Note (AS-i Parameter bits)
Set the parameter outputs to “1111” (0xF)
FID: periphery error
AS-i Input module address
0
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Status indication
Note (LED switching conditions display)
(1) LED green: Supply voltage
(2) red LED: AS-i communication error / Slave address = 0
Pin assignment
PIN 1
AS-i +
PIN 2
n.c.
PIN 3
AS-Interface -
PIN 4
n.c.
Scope of delivery
Scope of delivery
Actuator must be ordered separately.
Accessory
Recommendation (actuator)
BPS 260-1
BPS 260-2