106619 – Pepperl+Fuchs

STOCK: 8.00 unidade(s)
NCB15+U1+N0 Inductive Sensor NC NAMUR 15mm “P+F”

Installation flush
Assured operating distance 0 … 12.15 mm
Actual operating distance 13.5 … 16.5 mm typ.
Reduction factor rAl 0.28
Reduction factor rCu 0.25
Reduction factor r304 0.75
Output type 2-wire
Nominal ratings
Nominal voltage 8 V
Switching frequency 0 … 400 Hz
Hysteresis 1 … 15 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection yes
Current consumption
Measuring plate not detected min. 3 mA
Measuring plate detected = 1 mA
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 5128 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
NAMUR EN 60947-5-6:2000
IEC 60947-5-6:1999
Electromagnetic compatibility NE 21:2007
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
FM approval
Control drawing 116-0165
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated =36 V
Ambient conditions
Ambient temperature -25 … 100 °C (-13 … 212 °F)
Storage temperature -40 … 100 °C (-40 … 212 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm2
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Connection (system side) screw terminals , M20 x 1.5 cable gland , usable thread length 9.1 mm , screw-in depth max. 9.1 mm
Housing material PBT
Sensing face PBT
Degree of protection IP68
Note Tightening torque: 1.8 Nm (housing)
General information
Use in the hazardous area see instruction manuals
Classifications
System Classcode
ECLASS 11.0 27270101
ECLASS 10.0.1 27270101
ECLASS 9.0 27270101
ECLASS 8.0 27270101
ECLASS 5.1 27270101
ETIM 8.0 EC002714
ETIM 7.0 EC002714
ETIM 6.0 EC002714
ETIM 5.0 EC002714
UNSPSC 12.1 39121550