Autosimatic - Grupo Luminag

206847 – Pepperl+Fuchs

206847 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
VB14N-600 Barcode Scanner 2Interface RS232/RS485 “P+F”

Line scanner
Simple operation via function keys: test mode, code teaching and code optimization
Code reconstructor
Connect up to 32 scanners
Sturdy aluminum housing
Engine control (On/Off) possible
Degree of protection IP65

Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 2
Wave length 650 nm
Beam divergence < 1.5 mrad Pulse length 1.5 ms Repetition rate 200 Hz max. pulse energy 3.26 µJ Scan rate 600 ... 1000 s-1 Read distance 190 ... 600 mm Opening angle 50 ° Optical face front or on side (with deviation mirror) Resolution 0.35 mm ( 14 mils ) Indicators/operating means Operation indicator LED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS) Electrical specifications Operating voltage 10 ... 30 V DC Power consumption max. 5 W Interface Interface type serial , RS-232 and RS-485 up to 115.2 kBit/s ID-NET™ up to 1 Mbit/s Input 1 Input type External triggering Output Signal output 2, programmable, optocoupled Switching voltage max. 40 V DC Switching current max. 40 mA Voltage drop 1 V at load current = 10 mA Compliance with standards and directives Directive conformity EMC Directive 2004/108/EC Standard conformity Noise immunity EN 61000-6-2:2005 Emitted interference EN 55022 Degree of protection EN 60529 Laser class IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 Ambient conditions Ambient temperature 0 ... 45 °C (32 ... 113 °F) Storage temperature -20 ... 70 °C (-4 ... 158 °F) Relative humidity 90 % , noncondensing Shock resistance IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis Vibration resistance IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis Mechanical specifications Degree of protection IP65 Connection 1 m cable with 25-pin Sub-D connector Material Housing Aluminum Mass 330 g Classifications System Classcode ECLASS 11.0 27280102 ECLASS 10.0.1 27280102 ECLASS 9.0 27280102 ECLASS 8.0 27280102 ECLASS 5.1 27280102 ETIM 8.0 EC002999 ETIM 7.0 EC002999 ETIM 6.0 EC002999 ETIM 5.0 EC002999 UNSPSC 12.1 43211701

REF: 206847 Categoria: