233248 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
UBE800-F77-SE2-V31 Through-Beam Ultrasonic Barrier “P+F”

Miniature design
Highly visible LEDs for Power ON and switching state
High switching frequency
Program input
Degree of protection IP67
Sensing range 0 … 800 mm emitter/receiver spacing
Standard target plate see table
Transducer frequency approx. 300 kHz
Response delay = 5 ms
Limit data
Permissible cable length max. 300 m
Indicators/operating means
LED green Power on ( emitter )
LED yellow switching state ( receiver )
Electrical specifications
Rated operating voltage 24 V DC
Operating voltage 20 … 30 V DC , ripple 10 %SS ; 12 … 20 V DC sensitivity reduced to 80 %
No-load supply current = 20 mA
Time delay before availability = 150 ms
Input
Input type 1 program input (receiver)
Level low level : 0 … 0.7 V ; high level : > 14 V
Input impedance 16 kO
Pulse length = 3 s
Output
Output type 1 switch output PNP, NO
Rated operating current 200 mA , short-circuit/overload protected
Voltage drop = 2 V
Switching frequency 100 Hz
Off-state current = 0.01 mA
Compliance with standards and directives
Standard conformity
Standards EN IEC 60947-5-2:2020
IEC 60947-5-2:2019
Approvals and certificates
UL approval cULus Listed, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated =36 V
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Shock resistance 30 g , 11 ms period
Vibration resistance 10 … 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection type M8 x 1 connector , 4-pin
Degree of protection IP67
Material
Housing Polycarbonate
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Installation position any position
Mass per 10 g
Tightening torque, fastening screws max. 0.2 Nm
Classifications
System Classcode
ECLASS 11.0 27272801
ECLASS 10.0.1 27272801
ECLASS 9.0 27272801
ECLASS 8.0 27272801
ECLASS 5.1 27272801
ETIM 8.0 EC001847
ETIM 7.0 EC001847
ETIM 6.0 EC001847
ETIM 5.0 EC001847
UNSPSC 12.1 41111960