276397 – Pepperl+Fuchs
STOCK: 0.00 unidade(s)
S1SD-1AI-1U.1 Isolating Amplifier 1-Channel 24VDC “P+F”
Input current and voltage sources
Current and voltage output
Accuracy 0.1 %
Configurable by DIP switches
Connection via screw terminals
Signal type Analog input
Operation time MTBF: 536 a acc. to SN 29500
stationary continuous operating, average ambient temperature 40 °C (104 °F)
Supply
Connection Power Bus or terminals 1-, 2+
Rated voltage 16.8 … 31.2 V DC
Power dissipation 0.6 W
Power consumption 0.7 W
Input
Connection side field side
Transmission range linearity range: -1 … 110 %
Input I
Connection terminals 5+, 6-
Input signal 0/4 … 20 mA , max. 50 mA
Input resistance = 25 O
Input II
Connection terminals 7+, 8-
Input signal 0/2 … 10 V , max. 30 V
Input resistance > 100 kO
Output
Connection side control side
Connection terminals 3-, 4+
Analog voltage output 0/2 … 10 V , load = 2 kO
Analog current output 0/4 … 20 mA, load = 600 O
Ripple = 10 mV eff
Transfer characteristics
Accuracy max. 0.1 % of full-scale value
Influence of ambient temperature < 100 ppm/K of full-scale value
Frequency range 0 ... 10 Hz , 0 ... 100 Hz , 0 ... 5 kHz
Settling time 70 ms , 7 ms , 150 µs
Galvanic isolation
Output/power supply safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Input/Other circuits safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Indicators/settings
Control elements DIP switch
Configuration via DIP switches
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection IEC 60529:2001
Protection against electrical shock EN 61010-1:2010
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Core cross section 0.5 ... 2.5 mm2 (20 ... 14 AWG)
Mass approx. 70 g
Dimensions 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate DEMKO 16 ATEX 1750X
Marking Ex-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-15:2010
International approvals
UL approval E106378
IECEx approval
IECEx certificate IECEx UL 16.0116X
IECEx marking Ex nA IIC T4 Gc
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Classifications
System Classcode
ECLASS 11.0 27210119
ECLASS 10.0.1 27210119
ECLASS 9.0 27210119
ECLASS 8.0 27210119
ECLASS 5.1 27210119
ETIM 8.0 EC001485
ETIM 7.0 EC001485
ETIM 6.0 EC001485
ETIM 5.0 EC001485
UNSPSC 12.1 32101514