277757 – Pepperl+Fuchs
STOCK: 0.00 unidade(s)
UC500-L2-E5-V15 Ultrasonic Sensor 100x100mm 380kHz “P+F”
Sensor head bidirectional and rotatable
Function indicators visible from all directions
Quick mounting bracket
Selectable sound lobe width
Programmable
Sensing range 35 … 500 mm
Adjustment range 50 … 500 mm
Dead band 0 … 35 mm
Nominal ratings
Response delay minimum: 20 ms
factory setting: 55 ms
Time delay before availability = 1600 ms
Indicators/operating means
LED green Operating display
LED yellow switching state
LED red error
Electrical specifications
Operating voltage 10 … 30 V DC , ripple 10 %SS
No-load supply current = 50 mA
Interface
Interface type Serial interface (programming adapter required)
9600 BPS, no parity, 8 data bits, 1 stop bit
Input/Output
Input/output type 1 synchronization connection, bidirectional
0 Level 0 … 1 V
1 Level 4 V … UB
Input impedance > 12 kO
Output rated operating current < 12 mA
Pulse length 0.5 ... 300 ms (level 1)
Pulse interval = 14 ms (level 0)
Synchronization frequency
Common mode operation = 70 Hz
Multiplex operation = 90 Hz / n , n = number of sensors , n = 10
(factory setting: n = 5 )
Input
Input type 1 program input
Level (switch point 1) 0 ... 1 V
Level (switch point 2) 4 V ... UB
Input impedance > 10 kO
Pulse length 2 … 10 s
Output
Output type 1 switching output E5, PNP NO/NC, programmable
Rated operating current 200 mA , short-circuit/overload protected
Voltage drop = 2 V
Repeat accuracy = 0.1 % of full-scale value
Switching frequency = 14 Hz
Range hysteresis programmable , preset to 1 mm
Temperature influence < 1.5 % of full-scale value
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated =36 V
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector plug M12 x 1 , 5-pin
Degree of protection IP67
Material
Housing PA-GF35
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 115 g
Factory settings
Output near switch point: 50 mm
far switch point: 500 mm
output function: Window mode
output behavior: NO contact
Beam width wide
Evaluation procedure averaging (MxN)
M = 5
N = 2
General information
Supplementary information Switch settings of the external programming adapter:
"output load": pull-down
"output logic": inv