277757 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
UC500-L2-E5-V15 Ultrasonic Sensor 100x100mm 380kHz “P+F”

Sensor head bidirectional and rotatable
Function indicators visible from all directions
Quick mounting bracket
Selectable sound lobe width
Programmable
Sensing range 35 … 500 mm
Adjustment range 50 … 500 mm
Dead band 0 … 35 mm
Nominal ratings
Response delay minimum: 20 ms
factory setting: 55 ms
Time delay before availability = 1600 ms
Indicators/operating means
LED green Operating display
LED yellow switching state
LED red error
Electrical specifications
Operating voltage 10 … 30 V DC , ripple 10 %SS
No-load supply current = 50 mA
Interface
Interface type Serial interface (programming adapter required)
9600 BPS, no parity, 8 data bits, 1 stop bit
Input/Output
Input/output type 1 synchronization connection, bidirectional
0 Level 0 … 1 V
1 Level 4 V … UB
Input impedance > 12 kO
Output rated operating current < 12 mA Pulse length 0.5 ... 300 ms (level 1) Pulse interval = 14 ms (level 0) Synchronization frequency Common mode operation = 70 Hz Multiplex operation = 90 Hz / n , n = number of sensors , n = 10 (factory setting: n = 5 ) Input Input type 1 program input Level (switch point 1) 0 ... 1 V Level (switch point 2) 4 V ... UB Input impedance > 10 kO
Pulse length 2 … 10 s
Output
Output type 1 switching output E5, PNP NO/NC, programmable
Rated operating current 200 mA , short-circuit/overload protected
Voltage drop = 2 V
Repeat accuracy = 0.1 % of full-scale value
Switching frequency = 14 Hz
Range hysteresis programmable , preset to 1 mm
Temperature influence < 1.5 % of full-scale value Compliance with standards and directives Standard conformity Standards EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 Approvals and certificates UL approval cULus Listed, General Purpose CCC approval CCC approval / marking not required for products rated =36 V Ambient conditions Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F) Mechanical specifications Connection type Connector plug M12 x 1 , 5-pin Degree of protection IP67 Material Housing PA-GF35 Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam Mass 115 g Factory settings Output near switch point: 50 mm far switch point: 500 mm output function: Window mode output behavior: NO contact Beam width wide Evaluation procedure averaging (MxN) M = 5 N = 2 General information Supplementary information Switch settings of the external programming adapter: "output load": pull-down "output logic": inv