2966595 – Phoenix Contact

STOCK: 0.00 unidade(s)
OPT-24DC/ 24DC/ 2 Plug-in miniature solid-state relay power solid-state relay 1N/O contact input: 24VDC output: 3 … 33VDC/3A

Product type Single solid-state relay
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Standards/regulations
Insulation Basic insulation
Overvoltage category III
Pollution degree 2
Maximum power dissipation for nominal condition 0.17 W
Test voltage (Input/output) 2.5 kV (50 Hz, 1 min., input/output)
Nominal input voltage UN 24 V DC
Input voltage range in reference to UN 0.8 … 1.2
Input voltage range 19.2 V DC … 28.8 V DC
Switching threshold “0” signal, voltage = 10 V
Switching threshold “1” signal voltage = 16 V
Typical input current at UN 7 mA
Typical response time 20 µs (at UN)
Typical turn-off time 300 µs (at UN)
Transmission frequency 300 Hz
Contact switching type 1 N/O contact
Design of digital output electronic
Output voltage range 3 V DC … 33 V DC
Limiting continuous current 3 A (see derating curve)
Maximum inrush current 15 A (10 ms)
Voltage drop at max. limiting continuous current = 150 mV
Output circuit 2-conductor, floating
Protective circuit Reverse polarity protection
Surge protection
Ambient conditions
Degree of protection RT III
Ambient temperature (operation) -25 °C … 60 °C
Ambient temperature (storage/transport) -25 °C … 70 °C
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Standards/regulations IEC 60664
EN 50178
Assembly instructions in rows with zero spacing
Mounting position any