304615-0093 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
NBB2-8GS40-E2-V1 Inductive Sensor NO PNP 2mm flush “P+F”

Increased operating distance
Stainless steel version
Extended temperature range
-40 … +85 °C
Output polarity DC
Assured operating distance 0 … 1.62 mm
Actuating element mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
8 mm x 8 mm x 1 mm
Reduction factor rAl 0.2
Reduction factor rCu 0.1
Reduction factor r304 0.55
Reduction factor rBrass 0.25
Output type 3-wire
Nominal ratings
Operating voltage 5 … 30 V
Switching frequency 0 … 6000 Hz
Hysteresis typ. 5%
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop = 1.5 V
Operating current 0 … 100 mA
Off-state current 0 … 0.2 mA
No-load supply current = 10 mA
Time delay before availability = 100 ms
Switching state indicator Multihole-LED, yellow
Functional safety related parameters
MTTFd 960 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated =36 V
Ambient conditions
Ambient temperature -40 … 85 °C (-40 … 185 °F)
Storage temperature -40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type Connector plug M12 x 1 , 4-pin
Housing material Stainless steel 1.4305 / AISI 303
Sensing face LCP
Degree of protection IP67
General information
Scope of delivery 2 hex nuts included