5069-SERIAL – Allen-Bradley

STOCK: 0.00 unidade(s)
Compact 5000 Serial Interface Module 2Channel 9Pin “A-B”

Dsub Serial interface module supporting Generic ASCII, Modbus RTU/ASCII, DF1 and DH485, Support RS232C, RS422 and RS485 wiring

With optical interface No
Supporting protocol for TCP/IP No
Supporting protocol for DeviceNet No
Supporting protocol for other bus systems No
Redundancy No
IO link master No
Supporting protocol for DeviceNet Safety No
Supporting protocol for EtherNet/IP Yes
Type of data transmission Module rack extension
Thermal dissipation, max 9.6 BTU/h
Power dissipation, max 2.8 W
Wire category 2 – power ports, 2 – communication ports
Module keying None
Isolation voltage 250V (continuous), basic insulation type, SA and MOD power to backplane, 250V (continuous), basic insulation type, backplane to communication channels, 250V (continuous), basic insulation type, backplane to chassis ground, 250V (continuous), basic insulat
Supporting protocol for LON No
Supporting protocol for ASI No
Supporting protocol for PROFIBUS No
Supporting protocol for CAN No
Supporting protocol for INTERBUS No
Supporting protocol for KNX No
Supporting protocol for Modbus No
Supporting protocol for Data-Highway No
Supporting protocol for SUCONET No
With potential separation No
Supporting protocol for SERCOS No
Supporting protocol for INTERBUS-Safety No
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for Foundation Fieldbus No
Supporting protocol for PROFINET CBA No
Supporting protocol for PROFINET IO No
Supporting protocol for PROFIsafe No
Supporting protocol for SafetyBUS p No
Slot width 1
ATEX temp code T4
RTB keying None
Transmit transaction ID 0…255
Serial port connectors Two DB-9 male with pins
Operating mode Generic ASCII, Modbus RTU, Modbus ASCII
Inputs 2 full-duplex (RS-232, RS-422), 2 half-duplex (RS-485)
Handshaking RTS/CTS hardware handshake always enabled, RTS/CTS can be controlled by the user
Indicators 1 green/red module status indicator, 1 transmit data (TXD) and 1 receive data (RXD) yellow/red status indicator per channel
Serial input voltage signal 3…25V DC regarding signal ground (SG) 0, asserted, ON, space, active, -3…-25V DC regarding signal ground (SG) 1, disasserted, OFF, mark, inactive
Mechanical
Width 22 mm
Height 137.85 mm
Depth 105.42 mm
Weight 175 g
DIN rail Compatible zinc-plated chromate-passivated steel DIN rail, You can use the EN50022 – 35 x 7.5 mm (1.38 x 0.30 in) DIN rail
Environmental
Surrounding air temperature, max 60 °C
Emissions IEC 61000-6-4
Vibration 5 G @ 10…500 Hz
ESD immunity 6 kV contact discharges, 8 kV air discharges
EFT/B immunity ±4 kV @ 5 kHz on power ports, ±3 kV @ 5 kHz on shielded output ports
Relative humidity 5…95% noncondensing
Shock Operating: 30 G, Non operating: 50 G
Conducted RF immunity 10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Surge transient immunity ±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±2 kV line-earth (CM) on shielded output ports
Operating temperature 0 °C