800734 – Pepperl+Fuchs

STOCK: 0.00 unidade(s)
NBB4-12GM50-E2 Inductive Sensor NO PNP 4mm flush DC “P+F”

Assured operating distance 0 … 3.24 mm
Reduction factor rAl 0.39
Reduction factor rCu 0.35
Reduction factor r304 0.75
Reduction factor rBrass 0.49
Output type 3-wire
Nominal ratings
Operating voltage 10 … 30 V
Switching frequency 0 … 800 Hz
Hysteresis typ. 5%
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop = 3 V
Operating current 0 … 200 mA
Off-state current 0 … 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current = 15 mA
Time delay before availability = 5 ms
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1820 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated =36 V
Ambient conditions
Ambient temperature -25 … 70 °C (-13 … 158 °F)
Mechanical specifications
Connection type cable PVC , 2 m
Cable version 3 x 0.14 mm2
Core cross-section 0.14 mm2
Housing material brass, nickel-plated
Sensing face PBT
Degree of protection IP67
Cable
Cable diameter 3 mm + 0.3 mm
Bending radius > 10 x cable diameter
General information
Scope of delivery 2 self locking nuts in scope of delivery
Classifications
System Classcode
ECLASS 11.0 27270101
ECLASS 10.0.1 27270101
ECLASS 9.0 27270101
ECLASS 8.0 27270101
ECLASS 5.1 27270101
ETIM 8.0 EC002714
ETIM 7.0 EC002714
ETIM 6.0 EC002714
ETIM 5.0 EC002714
UNSPSC 12.1 39121550