DL-S202 – Takex

STOCK: 0.00 unidade(s)
BackgroundSuppression PhotoSensor 30mA NPN/PNP “Takex”

Detection method Limited range reflective
Detecting distance 0.1 – 2m (with adjustment at or less)
Setting distance 0.2 – 2m (with 200×200mm white drawing paper)
Power supply 12-24V DC ±0% / Ripple 10% or less
Current consumption 30mA or less
Output mode NPN/PNP open collector 2 outputs
Rating: 100 mA (30 VDC) or less
NPN: sink current / PNP: source current
Operation mode Light ON/Dark ON selectable (with switch)
Response time 2 ms or less
Hysterisis 10% of detecting distance or less
Light source (light wavelength) Infrared LED (880 nm)
Light receiving element 2 segment photodiode
Indicator Red LED: Operation indicator / Green LED: Stability indicator
Volume(VR) NEAR/FAR: 5-turn optical distance adjustment
Switch(SW) Light ON/Dark ON selector switch
Short circuit protection Provided
Material Case and lens: polyarylate
Connection Attached cable
(Outer dimension: dia.4mm) 0.2mm2
4 cores 2m
Weight Approx. 100g
Accessories Operation manual *The mounting bracket and the cable with connector are separately available.
Environmental Specification
Ambient light Sunlight: illumination on light receiving surface 10,000 lx or less
Incandescent lamp: illumination on light receiving surface 3,000 lx or less
Ambient temperature -25 – +55 ? (non-freezing)
Ambient humidity 35-85%RH (non-condensing)
Protective structure IP66
Vibration 10-55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions
Shock 500 m/s2 / 3 times each in 3 directions
Dielectric withstanding 1,000 VAC for 1 minute
Insulation resistance 500 VDC, 20 MO or higher