EP1008-0001 – Beckhoff

STOCK: 0.00 unidade(s)
EtherCAT Box 8Channel Digital Input 24VDC 3ms M8 “Beckhoff”

The EP1008-0001 EtherCAT Box with digital inputs acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The state of the signals is indicated by light emitting diodes. The signals are connected via M8 screw type connectors.
The sensors are supplied from the box supply voltage US. The load voltage UP is not used in the input module, but it can be optionally connected for forwarding and is passed on to the next module.
The supply of the connected sensors is done by an internal, short-circuit proof driver module with a total of 0.5 A for all sensors.
Due to the input filter of 3.0 ms, the EP1008-0001 is preferably suitable for electronic and mechanical inputs, which thereby experience additional debouncing of the signal.

Specification EN 61131-2, type 1/3
Number of inputs 8
Input connections M8, screw type
Nominal input voltage 24 V DC (-15 %/+20 %)
Input filter 3.0 ms
“0” signal voltage -3…+5 V (EN 61131-2, type 3)
“1” signal voltage 11…30 V (EN 61131-2, type 3)
Input current typ. 3 mA (EN 61131-2, type 3)
Distributed clocks –
Sensor supply from control voltage, max. 0.5 A, short-circuit proof in total
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Current consumption from US 120 mA
Electrical isolation 500 V
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings CE, UL, ATEX
Ex marking II 3 G Ex nA IIC T4 Gc
Technical data
Housing data
Dimensions
To top
Housing data 8 x M8, 4 x M12
Dimensions (W x H x D) 30 mm x 126 mm x 26.5 mm
Material PA6 (polyamide)
Installation 2 fixing holes 3.5 mm diameter for M3