FS-V33CP – Keyence

STOCK: 0.00 unidade(s)
Fiber Amplifier M8 Connector PNP 2-Output “Keyence”

Main unit/Expansion unit
Main unit
Control output
2 outputs
Monitor output (1 to 5 V)
N/A
External input
Light source LED
Red, 4-element LED (Wavelength: 640 nm)
Response time
33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection
LIGHT-ON/DARK-ON (switch-selectable)
Display indicator
Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size
30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19″ (H) x 0.39″ (W) x 2.83″ (D)
Detection mode
Light intensity (area detection possible, automatic sensitivity-tracking function provided)/
[Limited light intensity/Count check/Abnormality detection]
Timer function
OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output
PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy
Input time: 2 ms (ON)/20 ms (OFF) min.*2
Unit expansion
Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units
Normal operation
HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8?
Rating
Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption
Normal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/
Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,
32 mA max.)*3
Environmental resistance
Ambient light
Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
Ambient temperature
-10 to +55 °C 14 to 131 °F (No freezing)*4
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
Shock resistance
500 m/s2, 3 times in each of the X, Y, and Z directions
Case material
Polycarbonate