Autosimatic - Grupo Luminag

GS75102192-1 – Carlo Gavazzi

GS75102192-1 – Carlo Gavazzi

STOCK: 0.00 unidade(s)
Safety Input Module 1NC 2.5V 100µA Dupline® “Carlo Gavazzi”
GS 7510 2192-1

Bus-powered input module
• Single input for potential-free contacts
• Small dimension IP67 housing for de-central
installation at the actual location of the switch
• Safety approved according to IEC/EN 61508-SIL3, IEC/
EN 62061-SIL3 and ISO/EN 13849-1 PL e
• Approval authority: TÜV Rheinland Group
• cULus approved
• Uses two Dupline® channels
• Operates on a standard Dupline network
• It is possible to use DuplineSafe modules and
standard Dupline® modules on the same bus
• Address coding with GS73800080
• Typically used for emergency stops or other NC safety
contacts
Bus-powered safety input
module approved according to cUL, IEC/EN 61508-
SIL3, IEC/EN 62061-SIL3
and ISO/EN 13849-1 PL e
by TÜV. The module has a
single input for potential-free
contacts, and it uses two
Dupline® channels for sending the safety signal. The
small dimension IP67 housing makes it suitable for
de-central installation, e.g.
inside a pull-cord switch.
The module is always used
in conjunction with the DuplineSafe Safety Relay GS
38300143230. The “safe
state” signal is transmitted
continuously to the Safety
Relay as long as the input
contacts are closed and the
module self-check is OK.
The Dupline® module is
delivered with a 8 pin male
multi connector.
Contact resistance < 1kO Cable length max. 2.5 m Dielectric voltage Inputs – Dupline None Response time 1 From input contact opens to safety relay releases max 300 ms Response time 2 From input contact closes to safety relay activates max 600 ms Safety Specifications Standards SFF 96% PFD (T1 = 1 year) 5.0 x 10-6 PFH 5.9 x 10-9/h Power ON delay < 5s Environment Degree of protection IP 67 Pollution degree 3 (IEC 60664) Operating temperature -40°C to 70°C Storage temperature -40° C to 70°C Humidity (non-condensing) 20 - 80% Mechanical resistance Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz) Housing Material Valox PBT, Yellow Dimensions 57,5 x 36,0 x 16,4 mm Termination Cable Material PVC, grey, UL2464 Length 90 mm Dimension 6 x 0.25 mm2 Connector 8 pin multi connector Type MSTB 2.5/8-st-5.08 Phoenix number 1757077 Approvals IEC/EN 61508-SIL3 IEC/EN 62061-SIL3 ISO/EN13849-1 PL e TÜV Rheinland Group cULus General Specifications Supply Specifications Power Supply Supplied by Dupline® Reverse polarity protection Yes Current consumption Typ. 1,0 mA

REF: GS75102192-1 Categoria: