IV2-GF30 – Keyence

STOCK: 0.00 unidade(s)
Sensor Amplifier Standard 1000images *4 24VDC ±10% “Keyence”

Tools
Available modes
Standard mode
Standard mode built-in tools
Outline, Color area*1, Area*2, Edge pixels, Color average*1, Brightness average*2, Width, Diameter, Edge presence, Pitch, OCR, Color/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)
Number of tools
Detection tools: 16 tools, position adjustment tool: 1 tool*3
Switch settings (programs)
128 programs (when using SD card) / 32 programs (when not using SD card)
Indicators
PWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SD
Image history
Save conditions
Selectable between NG only, NG and OK near threshold*5, and All *4
Image data transfer
Transfer destination
Selectable between SD card and FTP server
Transfer format
Selectable between bmp, jpeg, iv2p, and txt
Transfer conditions
Selectable between NG only, NG and OK near threshold*5, and All
Analysis information
RUN display
Tools list (Judgment results, degree of similarity, or degree of similarity bar display) *6
RUN information
Switchable between OFF, histogram, processing time, count, and output monitor
Histograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs
Processing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.)
Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors
Output monitor: ON/OFF status by output
Other functions
Image capture function
Image buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Color filter*1, White balance*1, Brightness correction
Tool functions
Mask outline, Masking function, Color extraction/exclusion*1, Color histogram function*1, Monochrome histogram function*2, Scaling function
Utilities
Failing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator*7
Input
Type
Switchable between non-voltage input and voltage input
For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Number of inputs
8 (IN1 to IN8)
Function
IN1: External trigger, IN2 to IN8: Enable by assigning optional functions
Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output
Type
Open collector output; NPN/PNP switchable, N.O./N.C. switchable
For open collector NPN output: Maximum rating of 26.4 V, 50 mA, residual voltage of 1.5 V or less
For open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or less
Number of outputs
8 (OUT1 to OUT8)
Function
Enable by assigning optional functions
Assignable functions: Total judgment (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error
Ethernet
Standard
100BASE-TX/10BASE-T
Connector
RJ45 8-pin connector
Network function
FTP client, SNTP client
Interface compatibility
Built-in Ethernet
EtherNet/IP?, PROFINET, TCP/IP non-procedure communication
Communication unit
EtherCAT?, CC-Link, DeviceNet?, PROFIBUS, RS-232C*8
Expanded memory
SD card (SD/SDHC) *9
Rating
Power voltage (including ripple)
Current consumption
1.8 A or less (including communication unit and output load)
Environmental resistance
Ambient temperature
0 to +50°C 32 to 122°F (No freezing)
Relative humidity
35 to 85% RH (No condensation)
Material
Main unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA,
Ethernet connector: Copper alloy + Ni plating, Main unit rear heat sink: Aluminum, Main unit rear DIN rail fixing tab: POM, Nameplate: PC
Weight
Approx. 330 g