IV3-G120 – Keyence

STOCK: 0.00 unidade(s)
Compact Model Sensor Amplifier Vision Sensor “Keyence”

Tools
Standard mode / Sorting mode
Tool with standard mode
Learning, Outline, Color area*1, Area*2, Edge pixels, Color average*1, Brightness average*2, Width, Diameter, Edge presence, Pitch, OCR,
Color prohibit*1, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob count
Number of tools
Total: 65 tools *3
Switch settings (programs)
128 programs (when using SD card) / 32 programs (when not using SD card)
Image history
Number of storable images
100 images*4
Save conditions
Selectable between NG only, NG and OK near threshold*5, and All*4
Image data transfer
Transfer destination
Selectable between SD card, FTP server, and SFTP server
Transfer format
Selectable between bmp, jpeg, iv3p, and txt, and file names can be modified
Transfer conditions
Selectable between NG only, NG and OK near threshold*5, and All
Analysis information
RUN display
Tools list (Judgment results, degree of similarity, or degree of similarity bar display)*6
RUN information
Switchable between OFF, histogram, processing time, count, and output monitor
Histogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs
Processing time: Processing time (latest, Max., Min., Ave.)
Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors
Output monitor: ON/OFF status by output
*6
Other functions
Image capture function
Digital zoom (2×, 4×), HDR, High gain, Color filter*1, White balance*1, Brightness correction, AI capture
Tool functions
Additional learning, Mask outline, Masking function, Color extraction/exclusion*1,
Color histogram function*1, Monochrome histogram function*2, Scaling function
Utilities
Failing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator*7, Additional FTP/SFTP Image Information,
Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching
Indicators
PWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SD
Input
Type
Switchable between non-voltage input and voltage input
For no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)
Number of inputs
8 (IN1 to IN8)
Function
IN1: External trigger, IN2 to IN8: Enable by assigning optional functions
Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output
Type
Photo MOS relay output, N.O./N.C. Switchable
Maximum rating 26.4 V 50 mA, residual voltage 1.5 V or less*8
Number of outputs
8 (OUT1 to OUT8)
Function
Enable by assigning the optional functions
Assignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error, Variety discrimination result
Ethernet
Standard
1000BASE-T/100BASE-TX
Connector
RJ-45 8pin connector
Network function
FTP client, SFTP client
Interface compatibility
Built-in Ethernet
EtherNet/IP®, PROFINET*9, TCP/IP non-procedure communication
Communication unit
EtherCAT®, CC-Link, DeviceNet™, RS-232C*10
Expanded memory
SD card (SD/SDHC)*11
Ratings
Power voltage
24 VDC ±10% (including ripple)
Current consumption
2.2 A or less (including a communication unit, without the AI Lighting unit, and including the output load)
3.4 A or less (including a communication unit, with the AI Lighting unit, and including the output load)
Environmental resistance
Ambient temperature
0 to +40°C 32 to 104°F (No freezing)*7
Relative humidity
35 to 85%RH (No condensation)
Material
Main unit case: PC
I/O terminal block: PA
Ethernet connector: Copper alloy + Ni plating
Main unit rear DIN rail fixing tab: POM
Power connector: PA/POM
Sensor head connector: Zinc + Ni plating/PA
Main unit rear heat sink: Aluminum
Nameplate: PC
Weight
Approx. 300 g 10.59 oz
*1 Color type only.
*2 Monochrome type only.
*3 Tools can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 64 detection tools can be set. The number of detection tools in Sorting mode are eight tools.
*4 Saves to the sensor amplifier’s internal memory. The images saved to the sensor amplifier can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.
*5 Learning tool only.
*6 Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).
*7 Usable on the software for the IV3 Series (IV3-H1).
*8 Make sure to keep a total of each output with 160 mA or less.
*9 Conformance Class B, Applicable protocol: LLDP, SNMP.
*10 When a communication unit (DL Series) is connected.
*11 Use only products recommended by KEYENCE