LP1D80008ED – Schneider

STOCK: 0.00 unidade(s)
Contactor TeSys Deca 4P(2NO+2NC) AC-1 <=440V 125A 48VDC coil screw clamp terminal TeSys Deca contactor, 4P(2NO/2NC) for category AC-1 applications up to 125A @440V. It provides with 48V DC sdandard coil, with no auxiliary contacts, power and control connections by screw clamp terminals. It procures with 10 Mcycles mechanical durability and 0.8 Mcycles electrical durability. It provides IP20 protection on front face conforming to IEC 60529. It can cover -40°C to 60°C operation temperature and without derating under 3000m altitude. Designed for demanding applications with maximum operating rates up to 3600 cycles per hour under maximum 60°C. The dimension is 127mm x 96mm x 196mm (H x W x D), mounting on rail or plate. Multi standards certified(UL,LROS,CSA,CCC,EAC,UKCA,CB,DNV-GL,RINA,BV) and Green Premium compliant (RoHs/Reach) contactor application Resistive load utilisation category AC-1 Poles description 4P [Ue] rated operational voltage Power circuit: <= 690 V AC 25...400 Hz [Ie] rated operational current 125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit [Uc] control circuit voltage 48 V DC Complementary Compatibility code LP1D Pole contact composition 2 NO + 2 NC Contact compatibility M4 Protective cover Without [Ith] conventional free air thermal current 125 A (at 60 °C) for power circuit Irms rated making capacity 1100 A at 440 V for power circuit conforming to IEC 60947 Rated breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current 135 A 40 °C - 10 min for power circuit 320 A 40 °C - 1 min for power circuit 640 A 40 °C - 10 s for power circuit 990 A 40 °C - 1 s for power circuit Associated fuse rating 200 A gG at <= 690 V coordination type 1 for power circuit 160 A gG at <= 690 V coordination type 2 for power circuit Average impedance 0.8 mOhm - Ith 125 A 50 Hz for power circuit Power dissipation per pole 12.5 W AC-1 [Ui] rated insulation voltage Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Power circuit: 1000 V conforming to IEC 60947-4-1 Overvoltage category III Pollution degree 3 [Uimp] rated impulse withstand voltage 8 kV conforming to IEC 60947 Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 10 Mcycles Electrical durability 0.8 Mcycles 125 A AC-1 at Ue <= 440 V Control circuit type DC DC standard Coil technology Without built-in suppressor module Control circuit voltage limits 0.1...0.3 Uc (-40…55 °C):drop-out DC 0.85...1.1 Uc (-40…55 °C):operational DC Inrush power in W 22 W (at 20 °C) Hold-in power consumption in W 22 W at 20 °C Operating time 6...20 ms opening 20...35 ms closing Time constant 75 ms Maximum operating rate 3600 cyc/h 60 °C Connections - terminals Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid Power circuit: connector 1 4…50 mm² - cable stiffness: flexible without cable end Power circuit: connector 2 4…25 mm² - cable stiffness: flexible without cable end Power circuit: connector 1 4…50 mm² - cable stiffness: flexible with cable end Power circuit: connector 2 4…16 mm² - cable stiffness: flexible with cable end Power circuit: connector 1 4…50 mm² - cable stiffness: solid Power circuit: connector 2 4…25 mm² - cable stiffness: solid Control circuit: screw clamp terminals 1 1…2.5 mm² - cable stiffness: flexible with cable end Tightening torque Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 12 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm Power circuit: 12 N.m - on connector hexagonal screw head 4 mm Control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver pozidriv No 2 mounting support Plate Rail Environment Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 product certifications UL CSA CCC EAC UKCA CB DNV-GL RINA BV LROS (Lloyds register of shipping) IP degree of protection IP20 front face conforming to IEC 60529 Permissible ambient air temperature around the device -40…60 °C 60…70 °C with derating Operating altitude 0...3000 m Fire resistance 850 °C conforming to IEC 60695-2-1 Flame retardance V1 conforming to UL 94 Mechanical robustness Vibrations contactor open (2 Gn, 5...300 Hz) Vibrations contactor closed (3 Gn, 5...300 Hz) Shocks contactor open (8 Gn for 11 ms) Shocks contactor closed (10 Gn for 11 ms) height 127 mm Width 96 mm Depth 196 mm Net weight 2.91 kg Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 21.0 cm Package 1 Width 11.0 cm Package 1 Length 14.0 cm Package 1 Weight 2.777 kg