LS-9501P – Keyence

STOCK: 0.00 unidade(s)
Controller PNP 0.01µm 1000BASE-T/100BASE-TX*2 “Keyence”

No. of connectable sensor heads
2
Head compatibility
Yes
Display
Display range
±99,999.99 µm to ±9,999.9 mm
LED display
POWER ON indicator, ERROR indicator
Input terminal block
Encoder input
NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
Synchronous 1, 2 input
Voltage input
Auto-zero 1, 2 input
Reset 1, 2 input
Storage trigger input
Storage enable input
Storage data clear input
Statistics 1, 2 input
Statistics clear 1, 2 input
Program selection input
Voltage input x 4 inputs
Output terminal
Analogue voltage output
±10 V x 2 outputs, output impedance 100 ?
Analogue current output
4 to 20 mA x 2 outputs, compatible load max. 350 ?
Universal output
PNP open-collector output x 10 outputs
Measured value and tolerance judgment output,
status output allocatable
Status 1, 2 output
PNP open-collector output
Total judgment output
Memory FULL output
Strobe 1, 2 output
Error output
PNP open-collector output (N.C.)
Interface
USB
USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)*2
RS-232C
Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
Display and settings panel
LS-D1000 Max. four heads connectable
Rating
Power voltage
24 VDC ±10 %, including Ripple (P-P)
Current consumption
When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected
When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected*3
Environmental resistance
Ambient temperature
When LS-HA100 not used: 0 to +50 °C
When LS-HA100 in use: 0 to +45 °C
Relative humidity
20 to 85 % RH (No condensation)
Weight: Approx. 1,500 g