LTMCUF – Schneider

STOCK: 0.00 unidade(s)
Motor Management TeSys T Controller Operator “Schneider”

unit with fast device replacement service
TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. It manages most critical processes while reducing downtime and increasing productivity as well as predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This motor management system is also a flexible system that supports six communication protocols which are Modbus™, CANopen, DeviceNet™, Profibus™, Ethernet/IP, and Modbus/TCP. TeSys T motor management system consist of several components which include the LTMR controller, the expansion module, HMI and software along with several accessories. The LTMR controller is the main component of the system that manages the basic functions. This includes the measurement of the ground current, motor temperature, three phase current of the motor, the controller also includes logic inputs and outputs which is used in fault management. The expansion module is directly connected to the controller and provides additional inputs as well as measure the voltage between the phases which allow the controller the monitor additional functions. TeSys T is highly reliable and has a very long product life thanks to a state-of-the-art component selection, to the all in one design and to the advanced electronic protection. TeSys T can be integrated in many different types of harsh environment such as dusty atmospheres, marine applications, high vibration applications and corrosive atmospheres and is used in Metal/Mining/Mineral, Oil & Gas, Water Wastewater. This is a TeSys operator control unit that is used in conjuction with LTMR controller to configure the parameters, display the information about the controller, display detected faults and control the motor locally. This operator unit has Fast Device Replacement Service (FDR). This operator unit has LCD screen to display the information along with 5 control keys and 4 LED indicators and has 2 ports for RJ45 connectors that are used to connect to the PC and controller.
display type
Backlit LCD
local signalling
4 LEDs
local control
10 push-button
device connection
Connection to a LTM R controller, RJ45 connector on rear
Connection to a PC, RJ45 connector on front
function available
FDR (fast device replacement)
Complementary
supply
Via the controller
maximum supply current
140 mA
power dissipation
1 W
standards
UL 60947-4-1A
EN/IEC 61131-2
CSA C22.2 No 60947-4-1
product certifications
CSA
EAC
NOM
CE
UL
C-Tick
electromagnetic compatibility
Electrostatic discharge, level 3, 8 kV air, 4 kV contact, conforming to EN/IEC 61000-4-2
Radiated RF fields, level 3, 10 V/m, conforming to EN/IEC 61000-4-3
Conducted RF disturbances, level 3, 10 V, conforming to EN/IEC 61000-4-6
Surges (shielded access), level 3, 2 kV, conforming to EN/IEC 61000-4-5
Fast transient bursts (shielded access), level 3, 2 kV, conforming to EN/IEC 61000-4-4
IP degree of protection
IP54 (front) conforming to EN/IEC 60947-4-1
IP20 (rear) conforming to EN/IEC 60947-4-1
mounting mode
Flush-mounted
width
117 mm
height
70 mm
depth
50 mm
net weight
0.4 kg
Environment
ambient air temperature for operation
-20…60 °C
ambient air temperature for storage
-40…80 °C
relative humidity
15…95 %
protective treatment
TC 12 humidity cycles at 55 °C conforming to EN/IEC 60068-2-30
mechanical robustness
Shocks: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27
Vibrations: 4 Gn, 5…300 Hz conforming to EN/IEC 60068-2-6
fire resistance
650 °C conforming to EN/IEC 60947-1
flame retardance
V2 conforming to UL 94