MD-X2000A – Keyence

STOCK: 0.00 unidade(s)
3-Axis Hybrid Laser Marker MC-P1 MD-AD-3D “Keyence”

Marking unit (controller + head) 13 W Standard area
Console
(sold separately)
MC-P1
3D function add-in
(sold separately)
MD-AD-3D
XY tracking add-in
(sold separately)
MD-AD-XYT
Z tracking add-in
(sold separately)
MD-AD-ZT
2D code reader dd-in
(sold separately)
MD-AD-2DR/MD-AD-2DRA
Marking method
XYZ 3-Axis simultaneous scanning method
Marking laser
YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) *1
Marking laser
Wavelength
1064 nm
Output
13 W
Q-switch frequency
CW (continuous wave), 1 to 400 kHz
Distance laser
Semiconductor laser Wavelength: 683 nm
Output: 5.0 mW
Class 3R laser product
(IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) *1
Guide laser/working distance pointer
Semiconductor laser, wavelength: 655 nm
output: 1.0 mW
Class 2 Laser Product
(IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) *1
Marking area
125 × 125 × 42 mm 4.92″ × 4.92″ × 1.65″
Standard working distance
(±variable width)
189 mm (±21 mm) 7.44″ (±0.83″)
Marking resolution
2 µm
Scan speed
Max. 12000 mm/s 472.44″/s
Character
type
Font
KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font *2
Barcode
CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
2D code
QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar
GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/
GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
Logo image
Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking
conditions
Workpiece style
Stationary marking, Moving marking (constant, encoder)
Character size (height/width)
0.1 to 125 mm 0.004″ to 4.92″
No. of registered jobs
2000 max.
No. of setting blocks
256
Input/output
Terminal block I/O, MIL connector I/O, laser safety module control I/O *3
Interface
RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) *4
Marking head installation direction
All directions
Marking head cable length
4.3 ±0.1 m 14.1′ ±0.3′
Cooling method
Forced air cooling
Applicable regulations
EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/
CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS/UKCA
Rated voltage and power consumption
100 to 240 VAC ±10% 50/60 Hz, 700 VA max.
Environmental resistance
Enclosure rating
IP64 (marking head)
Ambient temperature for transport/storage
-10 to 60°C 14 to 140°F (no freezing)
Ambient humidity for transport/storage
30 to 85% (no condensation)
Ambient temperature
0 to 40°C 32 to 104°F
Relative humidity
30 to 85% (no condensation)
Overvoltage category
II
Pollution degree
2
Weight
Controller: 23.0 kg 50.71 lb
Marking head: 13.8 kg 30.42 lb
Console: 2.0 kg 4.41 lb
*1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*2 The only TrueType and OpenType fonts supported are those fonts whose “Font embeddability” property is set to “Installable” or “Editable.” This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel].
*3 Only when the laser safety module (MD-C2A/MD-C2B) is installed.
*4 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP® and PROFINET