OLDK503A0002 – Wenglor
STOCK: 0.00 unidade(s)
Retro-Reflex Sensor Universal 10-30VDC PNP 200mA “Wenglor”
Features at a Glance
Switching distance adjuster
Clever inclusive mounting technology
Glossy objects can be detected
Simple installation
Minimal installation space
A reflector must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light.
current tab:
Technical data
Downloads
Optical Data
Range 5,000 mm
Reference Reflector/Reflector Foil RQ100BA
Switching Hysteresis < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100,000 h
Max. Ambient Light 10,000 Lux
Opening Angle 5 °
Two-Lens Optic yes
Electrical Data
Supply Voltage 10 ... 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 700 Hz
Response Time 714 µs
Temperature Drift < 10 %
Temperature Range -25 ... 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67
Connection M12 × 1; 4-pin
Safety-relevant Data
MTTFd (EN ISO 13849-1) 2,165.94 a
General Data
Scope of delivery Mounting Console
Output
PNP NO/NC antivalent yes
Adjustable parameters
Circuit NC
NC+NO
NO