PM1504 – Ifm

STOCK: 0.00 unidade(s)
PM-010-REA12-A-ZVG/US Flush Pressure Transmitter “Ifm”

Robust stainless steel housing for use in the food and beverage industry
Hygienic, flush design
Resistant to high-pressure cleaning with aggressive cleaning agents
High temperature resistance and high protection rating
Integrated temperature measurement via IO-Link

Measuring range
-1…10 bar
-14.5…145 psi
-0.1…1 MPa
Process connection threaded connection G 1/2 external thread sealing cone
Application
Special feature Gold-plated contacts
Measuring element ceramic-capacitive pressure measuring cell
Temperature monitoring yes
Application flush mountable for the food and beverage industry
Media viscous media and liquids with suspended particles; liquids and gases
Conditionally suitable for use in gases at pressures > 25 bar only on request
Medium temperature [°C] -25…125; (< 1h : 150) Min. bursting pressure 175 bar 2538 psi 17 MPa Pressure rating 75 bar 1100 psi 7.5 Mpa Vacuum resistance [mbar] -1000 Type of pressure relative pressure; vacuum No dead space yes MAWP (for applications according to CRN) [bar] 43 Electrical data Operating voltage [V] 18...30 DC Min. insulation resistance [MO] 100; (500 V DC) Protection class III Reverse polarity protection yes Integrated watchdog yes 2-wire Current consumption [mA] 3.5...21.5 Power-on delay time [s] < 1 3-wire Current consumption [mA] < 45 Power-on delay time [s] < 0.5 Outputs Total number of outputs 2 Output signal analogue signal; IO-Link Analogue current output [mA] 4...20; (scalable; 1:5) Max. load [O] 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) Short-circuit proof yes Overload protection yes Measuring/setting range Measuring range -1...10 bar -14.5...145 psi -0.1...1 MPa Analogue start point -1...8 bar -14.5...116 psi -0.1...0.8 MPa Analogue end point 1...10 bar 14.5...145 psi 0.1...1 MPa In steps of 0.005 bar 0.1 psi 0.0005 MPa Factory setting ASP = 0.0 bar AEP = 10.0 bar Temperature monitoring Measuring range -25...150 °C -13...302 °F Accuracy / deviations Repeatability [K] ± 0,2 Resolution [K] 0.2 Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) Characteristics deviation [% of the span] < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1) Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1) Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year) Temperature coefficient zero point [% of the span / 10 K] < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C) Temperature coefficient span [% of the span / 10 K] < ± 0,1 (-25...85 °C); < ± 0,3 (85...150 °C) Temperature monitoring Accuracy [K] ± 2.5 K + (0.045 x (ambient temperature - medium temperature)) Response times Damping for the analogue output dAA [s] 0...4 2-wire Step response time analogue output [ms] 30 3-wire Step response time analogue output [ms] 7 Temperature monitoring Dynamic response T05 / T09 [s] < 10 / < 25; (DIN EN 60751 water; > 0,9 m/s)
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor ED2: Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A)
SIO mode no
Required master port type A; (when pin 2 not connected: B)
Min. process cycle time [ms] 4.5
IO-Link resolution pressure [bar] 0.002
IO-Link resolution temperature [K] 0.2
IO-Link process data (cyclical)
function
bit length
pressure
16
temperature
16
device status
4
IO-Link functions (acyclical) application specific tag; internal temperature
Supported DeviceIDs
Type of operation
DeviceID
Default
1021
Operating conditions
Ambient temperature [°C] -25…80
Storage temperature [°C] -40…100
Protection IP 67; IP 68; IP 69K
Tests / approvals
EMC
DIN EN 61326-1
Shock resistance
DIN EN 60068-2-27
50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6
20 g (10…2000 Hz)
MTTF [years] 322
Note on approval
factory certificate available as download at www.factory-certificate.ifm
UL approval
UL Approval no.
J024
File number UL
E174189
Mechanical data
Weight [g] 307.4
Materials stainless steel (1.4404 / 316L); PTFE; FKM
Materials (wetted parts) ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PEEK; PTFE Min. pressure cycles 100 million Tightening torque [Nm] 20 Process connection threaded connection G 1/2 external thread sealing cone Remarks Pack quantity 1 pcs. Electrical connection Connection Connector: 1 x M12; coding: A; Contacts: gold-plated