PM1615 – Ifm

STOCK: 0.00 unidade(s)
PM-006-REA01-E-ZVG/US Flush Pressure Transmitter “Ifm”

Robust stainless steel housing for use in the food and beverage industry
Hygienic, flush design
Resistant to high-pressure cleaning with aggressive cleaning agents
High temperature resistance and high protection rating

Number of inputs and outputs Number of analogue outputs: 1
Measuring range
-1…6 bar
-14.5…87 psi
-100…600 kPa
Process connection threaded connection G 1 external thread sealing cone
Application
Special feature Gold-plated contacts
Measuring element ceramic-capacitive pressure measuring cell
Temperature monitoring no
Application flush mountable for the food and beverage industry
Media viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C] -25…125; (150 max. 1h)
Min. bursting pressure
100 bar
1450 psi
10000 kPa
Pressure rating
30 bar
435 psi
3000 kPa
Vacuum resistance [mbar] -1000
Type of pressure relative pressure; vacuum
No dead space yes
MAWP (for applications according to CRN) [bar] 30
Electrical data
Operating voltage [V] 18…30 DC
Min. insulation resistance [MO] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Integrated watchdog yes
2-wire
Current consumption [mA] 3.5…21.5
Power-on delay time [s] 1
3-wire
Current consumption [mA] < 45 Power-on delay time [s] 0.5 Inputs / outputs Number of inputs and outputs Number of analogue outputs: 1 Outputs Total number of outputs 2 Output signal analogue signal; IO-Link; (configurable) Number of analogue outputs 1 Analogue current output [mA] 4...20; (scalable) Max. load [O] 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) Short-circuit proof yes Overload protection yes Measuring/setting range Measuring range -1...6 bar -14.5...87 psi -100...600 kPa Analogue start point -1...4.8 bar -14.5...69.6 psi -100...480 kPa Analogue end point 0.2...6 bar 2.9...87 psi 20...600 kPa In steps of 0.002 bar 0.05 psi 0.2 kPa Factory setting ASP = 0.0 bar AEP = 6.0 bar Accuracy / deviations Repeatability [% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) Characteristics deviation [% of the span] < ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) Linearity deviation [% of the span] < ± 0,15; (Turn down 1:1) Hysteresis deviation [% of the span] < ± 0,15; (Turn down 1:1) Long-term stability [% of the span] < ± 0,1; (Turn down 1:1; per year) Temperature coefficient zero point [% of the span / 10 K] < ± 0,05; (0...70 °C) Temperature coefficient span [% of the span / 10 K] < ± 0,15; (0...70 °C) Response times Damping for the analogue output dAA [s] 0...4 2-wire Step response time analogue output [ms] 30 3-wire Step response time analogue output [ms] 7 Interfaces Communication interface IO-Link Transmission type COM2 (38,4 kBaud) IO-Link revision 1.1 Profiles Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) SIO mode no Required master port type A Process data analogue 3 Min. process cycle time [ms] 3.2 Supported DeviceIDs Type of operation DeviceID Default 663 Operating conditions Ambient temperature [°C] -25...80 Storage temperature [°C] -40...100 Protection IP 67; IP 68; IP 69K Tests / approvals EMC DIN EN 61000-6-2 DIN EN 61000-6-3 Shock resistance DIN EN 60068-2-27 50 g (11 ms) Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz) MTTF [years] 323 Note on approval factory certificate available as download at www.factory-certificate.ifm UL approval UL Approval no. J022 Mechanical data Weight [g] 338.4 Materials stainless steel (1.4404 / 316L); PBT Materials (wetted parts) ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE Min. pressure cycles 100 million Tightening torque [Nm] 20 Process connection threaded connection G 1 external thread sealing cone Remarks Pack quantity 1 pcs. Electrical connection Connection Connector: 1 x M12; coding: A; Contacts: gold-plated