XPSAK361144 – Schneider

STOCK: 0.00 unidade(s)
037556 Module Emergency Stop 110VAC 24VDC “Schneider”

EAN: 3389110375565
This XPSAK safety module monitors emergency shutdown pushbuttons, limit switches, light curtains and safety mats/edges. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It can also be used for electrical monitoring of switches activated by protection devices, with optional selection of synchronisation time between signals, monitoring of 4-wire sensing mats or edges. And monitoring of type 4 light curtains conforming to EN/IEC 61496-1 which have solid-state safety outputs with test function (light curtains XUSL). It is compatible with emergency push buttons, limit switches, safety light curtains and safety mats/edges, the 4 most common safety sensors in the industry. It has additional solid-state output for communication with PLCs about safety status of your process

safety module application
For emergency stop, switch, sensing mat/edges or safety light curtain monitoring
function of module
Monitoring of electro-sensitive protection equipment (ESPE)
Monitoring of a movable guard associated with 2 switches and automatic start
Monitoring of a movable guard
Multiple emergency stop monitoring 2-channel wiring
Emergency stop with 2 NC contacts monitoring 2-channel wiring
Sensing mat and edges monitoring
Proximity sensor monitoring
Emergency stop monitoring 1-channel wiring
Safety level
Can reach PL e/category 4 conforming to EN/ISO 13849-1
Can reach SILCL 3 conforming to EN/IEC 62061
Safety reliability data
DC > 99 % conforming to EN/ISO 13849-1
MTTFd = 154.5 years conforming to EN/ISO 13849-1
PFHd = 7.39E-9 1/h conforming to EN/IEC 62061
Type of start
Configurable
Connections – terminals
Captive screw clamp terminals, 1 x 0.14…1 x 2.5 mm² flexible with cable end, with double bezel
Captive screw clamp terminals, 1 x 0.14…1 x 2.5 mm² solid with cable end, with double bezel
Captive screw clamp terminals, 1 x 0.25…1 x 1.5 mm² flexible with cable end, with double bezel
Captive screw clamp terminals, 1 x 0.25…1 x 2.5 mm² flexible with cable end, with double bezel
Captive screw clamp terminals, 2 x 0.14…2 x 0.75 mm² flexible with cable end, with double bezel
Captive screw clamp terminals, 2 x 0.14…2 x 0.75 mm² solid with cable end, with double bezel
Captive screw clamp terminals, 2 x 0.25…2 x 1 mm² flexible with cable end, with double bezel
Captive screw clamp terminals, 2 x 0.5…2 x 1.5 mm² flexible with cable end, with double bezel
Output type
Relay instantaneous opening, 3 NO circuit(s), volt-free
Number of additional circuits
1 NC + 4 solid state outputs
[Us] rated supply voltage
110 V AC – 15…10 %
24 V DC – 15…10 %
Complementary
Synchronisation time between inputs
Unlimited (manual start)
2 or 4 s depending of wiring (automatic start)
Supply frequency
50/60 Hz
Maximum power consumption in VA
6 VA AC
Input protection type
Internal, electronic
[Uc] control circuit voltage
24 V DC
Maximum line resistance
28 Ohm
Breaking capacity
180 VA holding AC-15 C300 relay output
1800 VA inrush AC-15 C300 relay output
Breaking capacity
1.5 A at 24 V (DC-13) time constant: 50 ms for relay output
Output thermal current
6 A per relay for relay output
[Ith] conventional free air thermal current
18 A
Associated fuse rating
4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200
Minimum output current
10 mA for relay output
Minimum output voltage
17 V for relay output
Maximum response time on input open
40 ms
[Ui] rated insulation voltage
300 V (pollution degree 2) conforming to IEC 60947-5-1
300 V (pollution degree 2) conforming to DIN VDE 0110 part 1
[Uimp] rated impulse withstand voltage
4 kV overvoltage category III conforming to IEC 60947-5-1
4 kV overvoltage category III conforming to DIN VDE 0110 part 1
Local signalling
4 LEDs
Current consumption
30 mA at 24 V AC on power supply
mounting support
35 mm symmetrical DIN rail
Net weight
0.4 kg
Environment
standards
EN/ISO 13850
EN 1088/ISO 14119
EN/IEC 60947-5-1
EN/IEC 60204-1
product certifications
TÜV
UL
CSA
IP degree of protection
IP20 (terminals) conforming to EN/IEC 60529
IP40 (enclosure) conforming to EN/IEC 60529
Ambient air temperature for operation
-10…55 °C
Ambient air temperature for storage
-25…85 °C
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
6.5 cm
Package 1 Width
10.5 cm
Package 1 Length
12.5 cm
Package 1 Weight
465.0 g
Unit Type of Package 2
S02
Number of Units in Package 2
12
Package 2 Height
15.0 cm
Package 2 Width
30.0 cm
Package 2 Length
40.0 cm
Package 2 Weight
5.935 kg